Lava Iris 59 LE9930 Dead boot Repair
Lava_Iris_59_LE9930_S121
Lava Iris 59 LE9930 hang on logo
If your Lava Iris 59 is not turning on or stuck in a boot loop, there could be several reasons behind it. Here are a few troubleshooting steps you can try to repair the dead boot issue:
- Charge your device: Ensure that your Lava Iris 59 has enough charge in the battery. Connect it to a power source and let it charge for at least 30 minutes before trying to turn it on again.
- Try a different power source: If your device is not charging, try connecting it to a different power source, such as a different charger or USB port on your computer.
- Remove the battery: If your device has a removable battery, remove it and re-insert it after a few seconds. Try turning on your phone again.
- Perform a hard reset: If your device is still not turning on, try performing a hard reset. To do this, press and hold the power button and the volume down button simultaneously until the phone vibrates and the Lava logo appears.
- Flash the firmware: If none of the above steps work, it might be necessary to flash the firmware on your Lava Iris 59. You can do this by following the instructions provided by the manufacturer or by seeking assistance from a professional.
It’s important to note that flashing the firmware can be a complicated process and can potentially damage your device if not done correctly. It’s always recommended to seek professional help or follow the instructions provided by the manufacturer carefully to avoid any damage to your device.
download here
LAVA_LE9930_S121_EGY_21G22_ALL_VERSIONS_BACKUP BY UMT-NCK-SPD – eazy-share.com
LAVA_LE9930_S121_EGY_21G22_ALL_VERSIONS-BACKUP BY CM2 – EAZY-SHARE.COM
|
If you have a problem and you cannot find a solution to it, contact us
|
