HP EliteBook Folio 9480m Flash Bios Bin File
If You want to Update your Bios , you just should know that
Flashing the BIOS on your HP EliteBook Folio 9480m can help resolve issues with the device’s performance, security, and compatibility. However, it is important to proceed with caution when flashing the BIOS, as any mistakes during the process can cause permanent damage to the device. Here are the steps to flash the BIOS on your HP EliteBook Folio 9480m:
Step 1: Download the latest BIOS update for your device from the official HP website. Make sure you select the correct model number and operating system.
Step 2: Save the BIOS update file to your computer.
https://www.mediafire.com/file/7y7dvxuruaapfu6/M85_0150.zip/file
Step 3: Connect your device to a power source to ensure that it does not run out of power during the BIOS update process.
Step 4: Close all running applications on your device and restart your device.
Step 5: Press the F10 key repeatedly during the boot process to enter the BIOS setup utility.
Step 6: Select the “Advanced” tab and then select “Update BIOS.”
Step 7: Browse to the location on your computer where you saved the BIOS update file, select it, and click “Update.”
Step 8: The BIOS update process will begin. Do not interrupt the process or turn off your device during the update process.
Step 9: Once the update is finished, your device will restart automatically.
Step 10: After the device has restarted, enter the BIOS setup utility again by pressing the F10 key during the boot process. Check the version number of the updated BIOS to ensure that it has been updated successfully.
It is important to note that flashing the BIOS can be risky and may cause damage to your device if not done correctly. Therefore, it is recommended that only experienced users attempt to flash the BIOS. If you are unsure, it is best to seek professional assistance.
In Other way , If your Bios is dead , You need to use Programmer tool(the dumping way )
Dumping the BIOS on your HP EliteBook Folio 9480m with a programmer can be a technical process and should only be attempted by experienced users. Here are the general steps to dump the BIOS:
Step 1: Disassemble the HP EliteBook Folio 9480m to access the motherboard.
Step 2: Find and identify the BIOS chip on the motherboard. The BIOS chip is a small, rectangular chip with a label that says “BIOS.”
Step 3: Use a programmer device that is compatible with the BIOS chip to connect to the chip’s pins, following the manufacturer’s instructions.
Step 4: Dump the BIOS using the programmer software provided by the manufacturer of the programmer device, following the manufacturer’s instructions.
Step 5: Save the BIOS image to your computer.
https://www.mediafire.com/file/7y7dvxuruaapfu6/M85_0150.zip/file
Step 6: Disconnect the programmer device from the BIOS chip.
Step 7: Reassemble the HP EliteBook Folio 9480m.
It is important to note that dumping the BIOS with a programmer can be risky and may cause damage to your device if not done correctly. Therefore, it is recommended that only experienced users attempt this process. Additionally, it is important to ensure that you have the correct tools and equipment before attempting to dump the BIOS with a programmer.
You must know that is two Bios chip in some models (one is 2 MB , and the other is 16 MB ) , So the Upper files May Not Works
You just need this Original File :
https://www.mediafire.com/file/zmfizv8zw0nswfr/dump_HP_EliteBook_Folio_9480m_Bios.zip/file
To Get files passwords , Communicate with Eazy-share team
or on whatsapp
https://wa.me/00201157489619
|
If you have a problem and you cannot find a solution to it, contact us
|
