Troubleshooting and Fixing Samsung A145R Dead Boot Issue (MTK)


The Samsung A145R, powered by MediaTek (MTK) chipset, is a reliable smartphone known for its efficiency and user-friendly features. However, like any electronic device, it is not immune to issues, one of which is the dreaded “dead boot” problem. When your Samsung A145R fails to power on or remains stuck on the boot logo, it can be frustrating. In this article, we will explore the possible causes of a dead boot issue on the Samsung A145R and suggest some troubleshooting steps to resolve the problem.

  Possible Causes of Dead Boot Issue A145R

  1. Software Glitch: A corrupted system file, failed update, or incompatible third-party app can lead to software malfunctions that prevent the device from booting up correctly.
  2. Battery Issues: An exhausted or damaged battery may not provide enough power to initiate the boot process.
  3. Hardware Failure: Internal hardware components, such as the motherboard or power IC, may have encountered damage or malfunction.

 Troubleshooting Steps A145R

Before attempting any troubleshooting, ensure that your device’s warranty has not expired. If it’s still covered, contact Samsung or your authorized service provider for assistance. If the warranty has expired, you can try the following steps to fix the dead boot issue:

Step 1: Charge and Reboot

  1. Connect your Samsung A145R to a reliable power source using the original charging cable and adapter.
  2. Allow the device to charge for at least 30 minutes. If the battery was too low, it might not have enough power to start the boot process.
  3. Attempt a soft reboot by pressing and holding the power button for about 10-15 seconds until the device vibrates or shows signs of life.

Step 2: Safe Mode

  1. If the device is stuck in a boot loop, try booting into Safe Mode to rule out third-party app conflicts.
  2. Press and hold the power button to access the Power Menu.
  3. Long-press the “Power off” option until the “Reboot to Safe Mode” prompt appears.
  4. Tap “OK” to boot into Safe Mode. If the device boots up normally in Safe Mode, a third-party app may be the culprit.
  5. Uninstall recently installed apps one by one until the issue is resolved.

Step 3: Factory Reset

  1. If the problem persists, perform a factory reset to eliminate any software-related issues.
  2. Backup your essential data as a factory reset will erase all data from the device.
  3. Go to “Settings” > “System” > “Reset” > “Factory data reset” and follow the on-screen instructions.

Step 4: Firmware Update

  1. If the issue still persists, it may be due to a software glitch. Check for available software updates.
  2. Go to “Settings” > “Software Update” and tap on “Download and Install” if an update is available.

Step 5: Advanced Troubleshooting

  1. If none of the above steps resolve the dead boot issue, it’s time to seek professional help. Visit an authorized Samsung service center or a skilled technician who specializes in repairing mobile devices.


Experiencing a dead boot issue with your Samsung A145R can be worrisome, but it’s essential to stay calm and follow the troubleshooting steps outlined in this article. In most cases, the problem can be resolved with basic troubleshooting, but if all else fails, it’s best to seek professional assistance to diagnose and repair any potential hardware issues. Remember to back up your data regularly to avoid data loss during troubleshooting or repairs.

هذا الهاتف يموت عند محاوله فك شفرة عن طريق بورت ميديا تك ولتشغيل الهاتف مره اخرى يتم ذلك عن طريق تفليش ملف دامب عن طريق انلوك تول او عن طريق دامب جيتاج 

لتحميل الدامب باللينك التالى ( مدفوع)



i do all work remotely with team viewer

📞Contact us
✅What’s app
✅My website
✅My group
✅My page

إذا كان لديك مشكلة ولم تجد حل لها قم بالتواصل معنا

If you have a problem and you cannot find a solution to it, contact us

facebook telegram whatsAPP

من eng7ouda